Tea-to-water ratio: how many grams for a mug or gaiwan?
For a 250 ml mug, start with 2–3 g of loose tea. For a small gaiwan, try 4–5 g of oolong or pu-erh per 100 ml, or 3–4 g of green, white or black tea. If the leaves will stay in your drinking cup while you top up, begin lower, at 1–2 g per 250 ml. These are different brewing methods, so their ratios should be different too.
A ratio gives you a repeatable starting point. It cannot tell you exactly how you will like an unfamiliar tea. Use the producer’s instructions when available, then change the dose, time or temperature one at a time.
Longjing tea steeping in a gaiwan.
Photo: Difference engine · CC BY-SA 4.0Choose the method before calculating the dose
A mug with a removable infuser gives you a large serving after a relatively long steep. Gongfu brewing uses more leaf in less water, followed by short, repeated infusions. Grandpa-style brewing leaves a small amount of tea in the cup throughout drinking and topping up. Moving a gaiwan dose into a mug and leaving it for several minutes is a recipe for a much stronger drink.
The table uses the starting points from Dao Cha’s existing brewing guides. It is intended for ordinary loose-leaf Chinese tea, not powdered tea, concentrates or a universal tasting standard. Temperature and timing still depend on the particular tea.
Measure the water you actually pour
A vessel advertised as 150 ml may hold that much only when filled to the brim. A comfortable pouring level is usually lower, and the leaves also occupy space. Treat the number on the box as a capacity description, not a dose instruction.
Fill your empty vessel to the level you intend to use. Pour that water into a measuring jug. Alternatively, put the vessel on a kitchen scale, tare it and add room-temperature water: for this home brewing calculation, 1 g of water is close enough to 1 ml. Record the working volume and use that same filling level next time. There is no need to pursue laboratory precision; consistency matters more.
Scale a recipe without changing its method
Multiply the original leaf weight by your water volume, then divide by the recipe’s water volume. Written as a formula: new leaf weight = recipe leaf weight × new water volume ÷ recipe water volume.
For example, a mug recipe using 2.5 g in 250 ml becomes 3.5 g in 350 ml: 2.5 × 350 ÷ 250 = 3.5. For 500 ml, the same starting ratio gives 5 g. These are calculated examples, not measurements of an ideal dose.
A gaiwan recipe using 5 g in 100 ml becomes 6 g in 120 ml. Keep the short-infusion method. If you change to a much larger pot, expect to adjust the timing as well: filling and draining take longer, and the vessel loses heat differently.
Use grams to compare different leaf shapes
A spoonful of tightly rolled oolong and a spoonful of loose white tea contain very different amounts of leaf. Teatulia’s measuring guide illustrates this problem with bulky whole leaves, rolled leaves and fine-cut tea; its spoon measurements apply to its own products. A universal rule that every teaspoon equals 2 g will let you down.
If you have no scale, begin with the packet’s spoon measure for that particular tea. Otherwise use a small, loosely filled portion, taste early and adjust. Once you can weigh your usual tea, notice how that portion looks in your own spoon. Do not crush a bulky white tea to make it fit a borrowed volume rule.
Adjust strength without changing everything
If a cup is weak, first check that the leaves had enough room to open and that you used the intended amount of water. A tightly rolled oolong may need an opening infusion before you judge it. Try a little more time before adding extra dry leaf to an already brewing cup.
If a cup becomes unpleasantly strong before you can comfortably pour it, use less leaf next session. When the dose seems reasonable but the drink is drying or bitter, shorten the steep first. For a sensitive green tea, a lower temperature may also help. Keep one variable steady while you change another; otherwise a better cup tells you little about what worked.
Count servings and sessions separately
A 5 g portion in a gaiwan may produce several small infusions. A 2.5 g portion in a mug may produce one or more larger servings. Comparing only the first cup makes gongfu brewing look more leaf-intensive than the whole session may be.
For a useful record, write down the dry leaf used and the total tea you actually enjoyed. Do not count infusions that were discarded or too weak to drink. The resulting grams-per-session figure helps you plan how long a packet will last, but it does not measure caffeine or nutritional content.
Tips
- Write down five things when a tea works: its name, dry leaf weight, water volume, temperature and infusion time.
Questions and answers
How much tea do I need for a 350 ml mug?
Scaling the 2–3 g per 250 ml starting range gives 2.8–4.2 g for 350 ml. Begin near the lower end with an unfamiliar tea and adjust the next cup to taste. This is for a mug whose leaves are removed after steeping.
Does a stronger-tasting tea necessarily contain more caffeine?
Taste and colour cannot measure caffeine. Leaf material, the amount used and extraction conditions all matter. Use the dedicated caffeine guide for that question rather than treating this dose table as a caffeine chart.
Should I add one extra spoon for the pot?
You do not need an automatic extra spoon when scaling a known recipe by the actual water volume. Brew the calculated amount first. Add more next time only if the result needs it.
Related teas
See also
Chinese tea guides